Concrete Removal in
Pasco, WA
Driveways, slabs, patios, and parking lots broken and hauled away across Pasco, Kennewick, Richland, and all Tri-Cities WA. Hydraulic equipment. Flat-rate pricing. Full cleanup included.
Concrete & Asphalt Removal
for Every Surface Type
Concrete Driveways
Cracked, heaved, or aging concrete driveways broken and removed. Any thickness, rebar included.
Concrete Patios & Slabs
Patio slabs, walkways, shed pads, and any concrete surface you want gone, fast and completely.
Asphalt Parking Lots
Full or partial asphalt lot removal for commercial properties. Site left graded and ready for repaving.
Asphalt Driveways
Old asphalt driveways removed and site prepped for gravel, concrete, or new asphalt installation.
Foundations & Footings
Concrete foundations, footings, and block walls broken up and hauled away for demolition projects.
Sidewalks & Curbs
Damaged or unwanted sidewalks, curbs, and public-facing concrete removed safely and cleanly.
Hydraulic Power.
Flat-Rate Pricing. Full Cleanup.
Hydraulic Power
Our hydraulic breaker hammer demolishes even thick, rebar-reinforced concrete in a fraction of the time of manual jackhammering.
Full Debris Hauling
Every piece of broken concrete and asphalt is loaded and hauled off-site. No dumpster rental needed from you.
Flat-Rate Pricing
We quote per square foot with no surprises. Know your full cost before a single piece of concrete is broken.
The Equipment Behind
Every Removal Job
How Concrete Removal
Works in Pasco
Free Quote
We assess the slab type, thickness, and reinforcement to give you a flat per-square-foot price with no surprises.
Schedule
Same-day and next-day slots often available. We confirm your date and arrive on time.
We Break It
Hydraulic breaker shatters the surface. Skid steer loads the pieces into our dump trailers fast and clean.
Hauled & Done
All material hauled to proper disposal. Site left clean and graded, ready for your next project.
Concrete Removal Across
Pasco, Kennewick & Richland
Concrete and Asphalt Removal in Pasco, WA
Old concrete and asphalt are some of the most labor-intensive materials to remove without the right equipment. Manual jackhammering is slow, loud, and exhausting. PL Equipment Rental uses a hydraulic breaker attachment on our Bobcat E32 mini excavator to demolish slabs of any thickness in a fraction of the time. Our skid steer loads the broken pieces into our 14,000 lb dump trailers, and the entire area is cleared and hauled away in a single day for most residential projects in Pasco, Kennewick, and Richland.
Concrete Removal vs. Asphalt Removal: What to Expect
Concrete and asphalt require different approaches. Concrete is harder and may contain rebar that must be cut out during removal. Asphalt can be softer but requires proper disposal to avoid environmental issues. Both materials are handled by our licensed and insured team, hauled to certified disposal facilities, and the site is always left clean. Call (509) 212-4942 for a free estimate. For safety guidelines on concrete work, visit WA Labor & Industries.
Concrete & Asphalt Removal FAQ
Concrete removal in Pasco typically costs $1 to $6 per square foot depending on thickness, reinforcement, and site access. A standard 2-car driveway runs approximately $800 to $2,500 for removal and hauling. We provide flat-rate quotes based on your specific slab before any work begins. Call (509) 212-4942 for a free estimate.
We remove concrete and asphalt driveways, walkways, patios, slabs, parking lots, foundations, curbs, and sidewalks throughout Pasco, Kennewick, and Richland. Rebar-reinforced concrete is not a problem for our hydraulic breaker equipment. No surface is too thick or too old.
Yes. Full debris removal and hauling is included in every job. We load all broken concrete and asphalt into our 14,000 lb dump trailers and haul it to a proper disposal facility. The area is left clean and ready for new paving, gravel, or landscaping.
We use the hydraulic breaker hammer attachment on our Bobcat E32 mini excavator to break concrete slabs efficiently. The T550 skid steer loads the broken pieces into our dump trailers. This combination handles any thickness of concrete or asphalt quickly and without the mess of manual jackhammering.
A standard residential driveway takes 4 to 8 hours including breaking, loading, and hauling. Larger slabs or parking lots are completed in one to two days. We always provide a time estimate during your free quote so you can plan your project accordingly.
Yes. We work safely near foundations, walls, and structures using our compact equipment with precise hydraulic controls. Our operators are experienced in selective concrete removal that protects adjacent structures while fully removing the targeted surface.
Same-day service is available for smaller jobs depending on our current schedule. Call (509) 212-4942 early in the morning for the best chance of same-day service. For larger slabs or parking lots, we typically schedule within 24 to 48 hours of your call.
Concrete is harder, denser, and more expensive to remove because it requires more energy to break apart, especially if reinforced with rebar or mesh. Asphalt is softer and can sometimes be removed in large sections without full pulverization. Both are hauled off-site with our dump trailers.
Most concrete driveway removal projects in Pasco do not require a permit for removal alone. If you are also replacing the driveway with new concrete or asphalt, a driveway permit may be required before the new installation. We clarify permit requirements during your free estimate.
Yes. We remove the existing asphalt, grade the base properly, and coordinate gravel delivery as part of a complete driveway conversion project. Many homeowners in Pasco and Tri-Cities switch from asphalt to gravel for lower long-term maintenance costs. Ask about our combined removal and gravel delivery package.
Ready to Remove That Old Concrete?
Get a Free Estimate Today
Serving Pasco, Kennewick, Richland & all Tri-Cities. Flat-rate pricing, full hauling, same-day available.